It might be dangerous to drive on a freshly laid asphalt surface before it has had a chance to dry and harden. Fortunately, asphalt’s drying and curing cycles are pretty consistent, making it simple to determine when you and other people may safely use your new asphalt road.

 

How Long to Stay Off the Driveway After Sealcoating? If you’re planning to have a new asphalt driveway or parking lot built, you’re likely to get this question a lot.

How Long to Stay Off the Driveway After Sealcoating?

For two days, you should avoid using the asphalt driveway. It’s safe to walk on right away, but it’s best if you don’t drive on it for at least 48 hours.

 

There is a two- to three-day drying period for new asphalt surfaces, such as driveways or parking lots. After that, you won’t have to worry about harming your new pavement while using it for walking or driving. Depending on how urgently you need the surface, you may want to wait as close to 72 hours.

What Is the Difference Between the Drying and Curing Processes?

When it comes to asphalt, drying and curing are two distinct processes. The first drying phase is just a few days, but the curing process takes around 30 days. The sun’s heat dries the pavement, allowing the trapped oil to escape. Sealcoating is often recommended after roughly a month because it prevents the asphalt from drying out excessively.

 

It is safe to use after a brief drying time. Still, until the surface has thoroughly dried and been sealed, it is advisable to be cautious with anything that might harm it, including heavy machinery and potentially damaging compounds like oils.

When Is the Best Time of Day to Seal a Driveway?

Depending on the weather, the drying period of the asphalt sealer might vary significantly. You should be able to walk on the asphalt in 2 to 4 hours at this time of year. Applying a driveway sealer in the summer is such a good idea.

 

When applied in the summer, asphalt sealer has more time to cure properly due to natural warmth and sunshine than if used in the cooler months. Summer’s high temperatures, minimal humidity, and blazing sun expedite the drying process.

 

Before it rains, the driveway sealer must be completely dry. If it rains shortly after the sealer is applied, the rain might wash the sealer away. To speed up the curing process, we utilize chemicals that may enable us to wait at least 24 hours before any rain. 

 

Asphalt sealcoat should be applied by the most reputable company in the paving sector. The amount of time you must keep away from your newly applied asphalt sealcoat depends on the quality of the job. A-Rock Asphalt Services is here to answer your questions.

Leave a Comment

Get a Free Quote Today!

Contact us by giving us a call at 801-973-9200 or by filling out our form! We can’t wait to hear from you

We serve the greater Wasatch front and Summit County

CONTACT

Scroll to Top